FLL Mission Overview Part 2 - Bury Carbon Dioxide (Carbon Sequestration)

Objective: Move the Carbon Dioxide (gray balls) to the Underground Reservoir (outlined square in the top left corner) so that the balls are touching the protruding outline or the mat inside the outline; the ball cannot touch the mat outside of it.

Point Worth: 5 points for each gray ball touching the Underground Reservoir.

Mission Location: The Carbon Dioxide (gray balls) are scattered throughout the table, generally near the vertical center. The Underground Reservoir corner is in the top left corner.

Estimated Difficulty Level: Medium

Time Length Rating: 8/10

Unique Challenge Aspects: This mission looks like it will take quite a bit time since the balls are scattered all across the board. This is where good mission planning comes in; teams may be able to incorporate this mission with others to save time.

Also, the outline protrudes from the table surface quite a bit, so the robot cannot simply and easily “just” push the ball in. While this method is possible, other methods, perhaps more accurate, may be considered by a team.

Note: It does not matter what happens to the tires holding the gray balls in place; in fact, they can be removed as part of the stray objects rule.

Details here: http://firstlegoleague.org/community/fll/game.aspx

Richard

PS Make sure to read Jim's post below! Really good stuff :)

Celebrating MINDSTORMS with a Remix - Part 3

The ROBOTMAK3RS continued their celebration of the 25th Anniversary of MINDSTORMS through these Fall and Winter remix projects. Each ROBOTMAK3R was tasked with selecting one LEGO set of their choice and combining it with a MINDSTORMS set. Below are the five amazing models they came up with. Braill3 by Jerry Nicholls Braill3 is an EV3-based LEGO Braille bricks reader. This robot uses its fingertip, made from three touch switches, to read messages written using the LEGO Braille bricks and will speak out what it detected. If it sees a simple maths problem it will attempt to solve it and give the answer as well. To learn more about the process of creating this machine, read Jerry's blog . Braill3 can be viewed here . Set Review: The Braille Bricks set is well thought out. The ratios of the letters is suitable for general use and the addition of some punctuation and arithmetic operators is excellent. There is a card showing what bricks there are and their quantities, but no form of sort...

Celebrating MINDSTORMS with a Remix - Part 2

The ROBOTMAK3RS continued their celebration of the 25th Anniversary of MINDSTORMS through these summer and fall remix projects. Each ROBOTMAK3R was tasked with selecting one LEGO set of their choice and combining it with a MINDSTORMS set. Below are the five amazing models they came up with. Remote controlled material handle r by Jozua van Ravenhorst (aka Mr Jo) This remix combines the LEGO Technic Material Handler (42144) with MINDSTORMS EV3 (31313) It uses the power of pneumatic cylinders to move objects around. By using a bluetooth remote control, very precise movements can be made with this model. Touch sensors in the base chassis prevent the turret twisting the cables that go through the turntable to much. The program has several protections to prevent over pressurizing the system for each of the 3 individual pumps and valves that control the 2 booms and claws. The real version of this machine is mostly used in waste material sites to bring the material to machines that sort and...

Celebrating 25 Years of MINDSTORMS

In celebration of the 25th Anniversary of MINDSTORMS, we take a trip through history. Please also visit ROBOTMAK3RS Community every week as we highlight different projects all through 2023 in celebration of the anniversary. Some of the early history is based on the content shared by Coder Shah in our MINDSTORMS EV3 Community Group . Some of the text and links may have been edited from his original posts for consistency and clarity. 1984 - Kjeld Kirk Kristiansen watched a TV program called "Talking Turtle," where MIT professor Seymour Papert demonstrated how children could control robot "turtles" using LOGO, a programming language he developed. 1988 - The collaboration between MIT and LEGO resulted in LEGO TC Logo in 1988, which allowed students to control LEGO models using computer commands. The video shows Papert demonstrating TC Logo. 1990 - LEGO TC Logo was hampered since the robots you built had to be tethered to a personal computer. LEGO and MIT...

ROBOTMAK3RS Blog

Search This Blog