FLL Mission Overview Part 1 - Raise the Flood Barrier

This segment is the first of many that will discuss each of the FLL Climate Connections missions in depth. You can read about them here: http://firstlegoleague.org/community/fll/game.aspx

Sorry for the delay on this - school has been quite the time eater!

Objective: Find a way – not necessarily using the lever – so that the large flood barrier/LEGO plate is upright and the red lever is down.

Point Worth: 15 points

Mission Location: Top/Center, slightly offset to the left - just enough to get in the way of the first Find Alignment arrow!

Estimated Difficulty Level: 2/10

Time Length Rating: Low

Unique Challenge Aspects: While this challenge may seem pretty straightforward and simple, there are variables that may affect its completion. The Dual-lock is not perfect, so that the two ends may be shoved together particularly tight at one competition table, causing barrier to be really stiff; at the next table, the two ends might spread apart on another table so that the barrier is particularly loose! This is a simple thing to check for before the round; make sure you do! Remember that teams get at least one minute before the round to check on the table conditions.

Enjoy, and stay tuned for the rest of the missions!

Richard

Celebrating MINDSTORMS with a Remix - Part 3

The ROBOTMAK3RS continued their celebration of the 25th Anniversary of MINDSTORMS through these Fall and Winter remix projects. Each ROBOTMAK3R was tasked with selecting one LEGO set of their choice and combining it with a MINDSTORMS set. Below are the five amazing models they came up with. Braill3 by Jerry Nicholls Braill3 is an EV3-based LEGO Braille bricks reader. This robot uses its fingertip, made from three touch switches, to read messages written using the LEGO Braille bricks and will speak out what it detected. If it sees a simple maths problem it will attempt to solve it and give the answer as well. To learn more about the process of creating this machine, read Jerry's blog . Braill3 can be viewed here . Set Review: The Braille Bricks set is well thought out. The ratios of the letters is suitable for general use and the addition of some punctuation and arithmetic operators is excellent. There is a card showing what bricks there are and their quantities, but no form of sort...

Celebrating MINDSTORMS with a Remix - Part 2

The ROBOTMAK3RS continued their celebration of the 25th Anniversary of MINDSTORMS through these summer and fall remix projects. Each ROBOTMAK3R was tasked with selecting one LEGO set of their choice and combining it with a MINDSTORMS set. Below are the five amazing models they came up with. Remote controlled material handle r by Jozua van Ravenhorst (aka Mr Jo) This remix combines the LEGO Technic Material Handler (42144) with MINDSTORMS EV3 (31313) It uses the power of pneumatic cylinders to move objects around. By using a bluetooth remote control, very precise movements can be made with this model. Touch sensors in the base chassis prevent the turret twisting the cables that go through the turntable to much. The program has several protections to prevent over pressurizing the system for each of the 3 individual pumps and valves that control the 2 booms and claws. The real version of this machine is mostly used in waste material sites to bring the material to machines that sort and...

Celebrating 25 Years of MINDSTORMS

In celebration of the 25th Anniversary of MINDSTORMS, we take a trip through history. Please also visit ROBOTMAK3RS Community every week as we highlight different projects all through 2023 in celebration of the anniversary. Some of the early history is based on the content shared by Coder Shah in our MINDSTORMS EV3 Community Group . Some of the text and links may have been edited from his original posts for consistency and clarity. 1984 - Kjeld Kirk Kristiansen watched a TV program called "Talking Turtle," where MIT professor Seymour Papert demonstrated how children could control robot "turtles" using LOGO, a programming language he developed. 1988 - The collaboration between MIT and LEGO resulted in LEGO TC Logo in 1988, which allowed students to control LEGO models using computer commands. The video shows Papert demonstrating TC Logo. 1990 - LEGO TC Logo was hampered since the robots you built had to be tethered to a personal computer. LEGO and MIT...

ROBOTMAK3RS Blog

Search This Blog